Fireproof junction boxes IP66

General and technical data

Fireproof junction boxes КМ-О IP66 are designed for connection and branching of fire-resistant cable lines. They are used for outdoor and indoor installation under a shelter.

The body of junction boxes is made of 1,2mm thick galvanized steel and is covered by polymeric paint.

Body of fireproof junction box has a rectangular or square shape. The lid is hermetically sealed to the housing by the connection with screws and sealing silicone gasket. Inside the enclosure there are ceramic terminal blocks.

The screw ends on the terminal block have a rounded shape that allows the wires to be secured without damage. Ceramic terminal blocks provide a secure connection in fire conditions.

On the cover and on the housing there are grounding clamps "PE". In side walls there are stainless steel cable glands that provide protection degree at least IP66.

All external fixing elements are made of stainless steel.

Boxes are certified to comply with technical regulations: TR TS 004/2011 "On Safety of Low Voltage Equipment".

Main technical specifications

Shell protection degree: IP66
Fire resistance as part of a cable line: 60 minutes.
Climatic modification as per GOST 15150: MC1.
Operating temperature range from -40 ° C to +80 ° C
Connected cable diameter: 4-18 mm.
Nominal connecting capacity of terminals: 3.0, 6.0, 10.0 mm².
Rated voltage: 450 V

Modifications

Designation	Sizes**, mm	Quantity of cable glands, up to	Quantity of contacts, up to
КМ-О IP66-0808	86х86х66	4	8
КМ-О IP66-0812	86х126х66	6	12
КМ-О IP66-1010	103х103х66	4	14 8 (для сечения проводов 10,0мм²)
КМ-О IP66-1212	123х123х66	8	12
КМ-О IP66-1224	123х240х66	12	16
КМ-О IP66-1515	150х150х66	8	16
КМ-О IP66-1530	150х300х66	12	28
КМ-О IP66-2020	200х200х66	12	32
КМ-О IP66-2040	200х400х66	18	64

* Cable glands of other diameter can be installed on customer’s demands if technological capability of such installation is available. In this case, possible quantity of cable glands can differ from values mentioned in the table.

** Without regard to hangers and inputs

Designation of junction boxes during the order

KM-O(10k*6,0)-IP66-х A(sq)B(sq)C(sq)D(sq)E(sq)F(sq)G(sq)H(sq)I(sq)J(sq)K(sq)L(sq)M(sq)N(sq)O(sq)P(sq) R(sq)S(sq) T(sq) where:

KM-O – denomination;

10k - number of contacts in a terminal block;

6,0 – maximum possible cross-section of wires connected to terminal blocks. In the case of installation of a terminal block needed for connection wires with a cross-section up to 3,0 mm2 this designation is not used;

IP66- degree of protection;

х - designation of size of a junction box: «100х100»; d; «120х120» (see the table “Modifications” KM-O IP 66). In the case of modification with 80x80mm size designation is not used

A(sq)B(sq)C(sq)D(sq)E(sq)F(sq)G(sq)H(sq)I(sq)J(sq)K(sq)L(sq)M(sq)N(sq)O(sq)P(sq) R(sq)S(sq) T(sq) – placement, availability and type of a cable gland.

Types of cable glands used for connection of the cable laid in a metal hose, corrugated stainless pipe, pipe for water and gas below shall be specified during the order.

Types and manufacturers of cable glands can be changed at the discretion of the manufacturer keeping all the basic properties.

Ordering price of non-standard cable glands and RAL painting are on request.

Available sizes and materials of cable glands for FJBG IP66

It is possible to make non-standard cable glands on the customer’s demand.

Possible maximum and minimum diameters of cable armor:

- from 3 mm to 6,5 mm

- from 4 mm to 8 mm

- from 6 mm to 12 mm (standard shipment)

- from 10 mm to 14 mm

- from 8 mm to 16 mm

- from 13 mm to 18 mm

Cable glands can be manufactured from brass with covered with or from stainless steel.